Using metal wire cloth Utmost caution should be used when working with fine metal mesh. Once this mesh is cut, the edges are razor sharp. The key to handling mesh is to turn a 1/16 inch hem on all four sides before using. Wire cloth will have different characteristics depending on the choice of metal and wire gauge. Tip: be sure you work out all the details with a paper model first.

1. Wire cloth or metal mesh used is 100 or 200 mesh, 0022-.0045 wire gauge.

2. Cut with shears, scissors, or old rotary blade.

3. Score a line 1/16" from edge with a sharp object.

4. Place a ruler next to the scored line. Using the ruler as a straight edge, fold the cloth over to make a hem. Hem all cut edges.