Using metal wire cloth: Utmost caution should be used when working with fine metal mesh. Once this mesh is cut, the edges are razor sharp. The key to handling mesh is to turn a 1/16 inch hem on all four sides before using. Wire cloth will have different characteristics depending on the choice of metal and wire gauge. Tip: be sure you work out all the details with a paper model first. Printer friendly instructions.

1. Wire cloth or metal mesh used is 100 or 200 mesh, 0022-.0045 wire gauge.

2. Cut with shears, scissors, or old rotary blade.

3. Score a line 1/16" from edge with a sharp object.

4. Place a ruler next to the scored line. Using the ruler as a straight edge, fold the cloth over to make a hem. Hem all cut edges.